ToupeeUnion: men's hair systems manufacturer and supplier

Most hair system listings show you a base and a price. They do not tell you where the unit was knotted, how many the factory has on the shelf today, or what happens when the color arrives wrong.

We manufacture men's hair systems in Qingdao, China, using human hair. We hold 60,000+ units in stock, list 4,300+ SKUs, and build custom and OEM orders when a standard unit will not do the job.

Where our hair systems are made

Everything is produced in our own facility in Qingdao, China, one of the country's main centers for hair products manufacturing.

The sequence runs in-house from start to finish: hair preparation, color matching, ventilation, base construction, styling, and final inspection. No step gets handed to a third party, which is what lets us take a color change and a density change on the same order instead of booking two separate production runs.

Inside the production line

Hair preparation and ventilation

Bulk human hair arrives in bundles, not in ready-to-knot strands. It is washed, sorted by texture and length, then blended toward the color spec on the order.

Ventilation is the industry word for hand-knotting, and it is where a hair system is actually made. Single knots go into the front rows so the hairline stays soft and the knots stay invisible against skin. Double knots run through the crown and back, where hair takes the most abuse from washing, brushing, and heat styling. Lace and fine mono bases are hand-knotted this way. Thin skin and other solid bases use injection or V-loop construction, where hair is locked into the polyurethane instead of tied through mesh.

Base construction and styling

Base material is chosen before knotting starts, because it decides almost everything downstream. Swiss lace runs 0.02 to 0.05 mm and gives the least visible front hairline with the shortest service life. French lace is slightly thicker. Fine mono sits at 0.10 to 0.12 mm, the most durable of the breathable options. Thin skin at 0.03 to 0.05 mm and standard skin at 0.08 to 0.12 mm sit flattest against the scalp and pass the least air.

After knotting, the unit is cut to the ordered hair length and styled to the ordered look. Styling happens on the finished base, so what leaves the factory is what the customer sees when the box opens.

4,300+ SKUs, and what the catalog actually covers

A large catalog number is easy to print and hard to use. Here is what 4,300+ means in practice: six standard footprints, 128 colors, six densities, several hair lengths, and more than one base construction, multiplied out across the combinations.

Base size	Typical coverage	Usually ordered for
5 x 7 in	Front and crown	Early thinning, first units
6 x 8 in	Crown and top	The most common size
6 x 9 in	Top, with a little side coverage	Thinning that has moved past the crown
7 x 9 in	Top and sides	Denser loss across the top
7 x 10 in	Top, sides, and part of the back	Extensive thinning
8 x 10 in	Full top-of-head replacement	Advanced baldness

Those six cover the bulk of orders. If your coverage area falls between two sizes, or it is not rectangular, the size moves to a custom line.

60,000+ systems in stock

Stock units exist today. That is the entire point of holding them.

For an individual buyer, stock removes a production wait. For a salon, a distributor, or a hair replacement studio, it means you can quote a client a system you can actually deliver this month, and reorder the same spec without opening a new build.

What sits in stock: the popular footprints, the six standard densities from 80% to 130%, and the colors that account for the bulk of orders, in the base constructions that move fastest.

What does not sit in stock: a custom color blend, a non-standard shape, gray percentages outside the standard set, and unusual hair lengths. Those go into the production queue.

128 hair colors, and how to match yours

Color is where a hair system gets caught out. The 128 options cover natural blacks, browns, blondes, grays, and blended shades, and gray hair is available at fixed percentages of 0%, 10%, 20%, and 30%.

Matching is a daylight job. Hold the swatch against hair at the temples and at the nape, outdoors if you can. Warm indoor light pulls two different color numbers toward looking identical, and the temples are usually the first area to gray, so a system matched only at the crown can read too dark at the front. Anyone who has opened a box and found a shade darker than the swatch knows what that costs in goodwill.

If no standard number comes close, send a hair sample along with a photo taken in daylight. Custom color matching is a normal order line for us, not a special favor.

Six density options

Density is how much hair is knotted into the base, and it changes both how the system looks and how it behaves.

Density	How it reads	Usually ordered for
80%	Light, close to thinning-to-normal	Men with fine natural hair, older wearers
90%	Natural, everyday	The default for a first unit
100%	Fuller, still realistic	Medium natural density
110%	Visible volume	Under-40s, styles with height
120%	Heavy	Thick natural hair, bold styling
130%	Maximum	Specific looks, or buyers who want more time between replacements

Ordering 130% when your own hair sits at 90% is the most common first-order mistake. Heavy density traps more heat against the scalp, takes longer to dry after a wash, and reads as a solid block of hair at the front. Most first orders belong at 90% or 100%, and the sides and back usually get knotted a step lighter than the top, since natural hair thins there first.

Custom systems, OEM, and private label

What custom and OEM cover

Custom starts where stock stops. That means a base shape outside the six footprints, a color blend built from more than one shade, density that changes across the base (130% at the top down to 50% at the sides), a specific hair length, a specific hairline design, or your own brand label and packaging.

Spec	Stock	Custom
Base size	Six standard footprints	Any shape or size, from a template
Base material	Lace, fine mono, thin skin, mono and poly hybrids	Same range, plus mixed constructions
Hair color	128 standard colors	Blended to a sample or photo
Gray percentage	0%, 10%, 20%, 30%...~90%	Set per zone
Density	80% to 130%, one value	Varied across the base
Hair length	Standard lengths	Cut to order
Front hairline	Standard knotting	Specified knot pattern and graduation
Typical retail price	$135 to $250	$200 to $600

What to send with a custom order

A template is the fastest route. Cling film over the scalp, marker around the coverage area, transfer the outline to paper, then check that outline against the finished shape before production starts. A reference photo, a sample unit, or a written spec sheet also works when the customer already owns something they are happy with.

Include hair direction notes if you have a strong cowlick or a fixed part. That single detail is what keeps a custom unit from arriving with hair that wants to fall the wrong way.

Human hair, and what it changes

Human hair is the reason a system can be cut, colored, heat-styled, and re-styled the way your own hair can. Each unit goes through color grading, texture sorting, and length selection before knotting begins.

Two details matter more than the fiber itself.

Hair direction. Knotting hair to follow the wearer's natural growth pattern is what lets a system lie flat and blend at the edges. Get the direction wrong and the unit fights the wearer's hair every morning.

Density graduation. A front row knotted at the same density as the crown looks like a hedge. Front rows are normally knotted lighter, often across the first few millimetres of the hairline, so the transition reads as a hairline instead of as an edge.

Shipping, and where we are on the ground

We ship worldwide, to individual buyers, salons, distributors, and hair replacement studios.

We also run hair stores and service locations in the United States and Dubai. For a salon, that is worth more than a shipping label: someone in your own timezone can handle a fit question, a color dispute, or a return without a week of email.

Stock orders and custom orders move differently. Stock leaves from inventory. Custom units are built after the template and spec are confirmed, so queue position depends on what else is running that week.

Quality control, honestly

No factory ships a perfect unit every single time. A supplier who claims otherwise is not counting returns.

What we do instead is run three checkpoints.

• Incoming hair: texture, length, and color batch checked before knotting starts

• In-process: base construction and knot rows inspected on the frame, while a fix is still cheap

• Final: the finished unit checked for color, density, hairline appearance, ventilation, attachment areas, and overall finish before it is boxed

When something slips through, tell us. A color that reads wrong in daylight, a knot row that sits too heavy at the front, a base that fits tighter than the template suggested. Those are fixable, and we would rather replace a unit than have a salon client find the problem first.

Why work with ToupeeUnion

Buying from the factory changes a few things that are easy to miss until you have ordered through a middleman.

Spec changes go straight to the people who knot the unit, so a density adjustment or a hairline note does not get translated twice on the way down. There is no distributor margin stacked on top of our price. And stock and custom both come from the same floor, which means a salon can order ten stock units and two custom builds on one invoice and one shipment.

FAQ

Do you sell to individual customers, or only to salons and distributors?

Both. Individual buyers order stock units directly, and salons, distributors, and hair replacement studios order stock, custom, and OEM production at wholesale.

What is the difference between a stock system and a custom system?

A stock system exists already, in one of six footprints and one of 128 colors at a single density. A custom system is built to your template and spec: non-standard shape, blended color, density that varies across the base, or your own label.

Can you match a specific hair color?

Yes. Send a hair sample plus a photo taken in daylight, or a reference unit you are happy with. Custom blending is a standard order line.

Which base materials do you manufacture?

Swiss lace at 0.02 to 0.05 mm, French lace, fine mono at 0.10 to 0.12 mm, thin skin at 0.04 to 0.06 mm, standard skin at 0.08 to 0.12 mm, and hybrids such as a fine mono center with a poly perimeter.

How long does a hair system last?

It depends on the base. Thin skin runs one to three months, lace two to four, and fine mono six months and up. Water temperature, washing frequency, and how much tugging your removal routine involves will move those numbers by months either way.

How often does a system need maintenance?

Tape holds one to two weeks, liquid adhesive three to four weeks. A full perimeter service takes 45 to 90 minutes, and a fresh install takes 20 to 40 minutes plus 24 hours to cure before swimming or training.

Do you offer private label and OEM production?

Yes. Private label covers your own branding and packaging. OEM covers the unit itself, built to your color, density, base, and hairline specification.

How to start

If you are buying one system for yourself, the four things that matter are your coverage area, your hair color in daylight, your natural density, and how you plan to attach the unit. Send those and the catalog narrows from 4,300 SKUs to a short list.

If you are a salon, a distributor, or a brand, the useful information is your target spec, your volume, and your timeline. Stock gets you units now. Custom and OEM get you exactly what you specified.

We would rather tell you what we can make, what is on the shelf, and what can be changed than make the process sound harder than it is.